What size injectors?
#1
What size injectors?
whats up guys need some help on what size injectors i need for my build.well im running a forged 383 with 317 heads(for knaw),victor jr. with an aarons elbow and a edelbrock tb,epp blower cam,a gt4788 turbo with the racecover, and behind that is a 4l80e.so my question is what size injectors do you guys recommend me.would appreciate any help thanks.
#2
TECH Resident
iTrader: (17)
Join Date: Sep 2004
Location: NC - Charlotte area
Posts: 3,747
Likes: 0
Received 0 Likes
on
0 Posts
what is the cold side and hot side sizes on that turbo?
what compression? how much boost and what power do you expect to make?
I'm going to have to guess 90# + injectors... we kind of need to know a power level. the exact size of the turbo will help
what compression? how much boost and what power do you expect to make?
I'm going to have to guess 90# + injectors... we kind of need to know a power level. the exact size of the turbo will help
#4
TECH Resident
iTrader: (17)
Join Date: Sep 2004
Location: NC - Charlotte area
Posts: 3,747
Likes: 0
Received 0 Likes
on
0 Posts
I understand the turbo is a gt4788, but the cold and hot "turbines" have a particular size, and per that size and housing you have a certain airflow, its essentially a centrifugal blower, we have two huge ones that feed gas to our shaft furnace. that particular GT4788 i think according to a google search:
Turbine
-Wheel: 92.7mm w/ 82 trim
-Housing: 0.96, 1.08, 1.23, 1.39 A/R
Compressor
-Wheel: 117.6mm exd./88.0mm ind w/ 56 trim
-Housing: 0.69 A/R
are you building a front mount or rear mount? To make 750whp that is rather big..you will have plenty of room for 900hp range.
race car or street car or half and half? If you want a quick spooling setup, I would step a size down to say around a 80mm ~ 86mm. I would ask advice from other turbo people and look at different peoples builds on here...that honestly just seems overkill to me for the power you want to make