aeromotive 340 in tank pump
#2
On The Tree
Join Date: Sep 2008
Location: WHERE UNCLE SAM SAYS
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
1. Yes it works in the tank.
2. You will need a Teflon spacer and a injector 0-ring.
3. Find a spacer that fits over the pump nipple but doesn't cover the tip so you can still fit a o-ring on it. If you want to you can get the directions for the LPE kit online and use them as a guide.
4. Depending on your power level, you may or may not need to drill holes in the bottom sides of the bucket. The 340 pumps flow quite a bit, and you run the risk of sucking the bucket dry if you’re going WOT on a low tank.
2. You will need a Teflon spacer and a injector 0-ring.
3. Find a spacer that fits over the pump nipple but doesn't cover the tip so you can still fit a o-ring on it. If you want to you can get the directions for the LPE kit online and use them as a guide.
4. Depending on your power level, you may or may not need to drill holes in the bottom sides of the bucket. The 340 pumps flow quite a bit, and you run the risk of sucking the bucket dry if you’re going WOT on a low tank.