Siemens/ Deka 80# from FIC
#7
TECH Resident
iTrader: (17)
Join Date: Sep 2004
Location: NC - Charlotte area
Posts: 3,747
Likes: 0
Received 0 Likes
on
0 Posts
call Jon and ask for the data (have him look up your order) ; if he can't get it to you right then we can certainly get something to you in the following few days. Are those injectors disc, pintle, or ball ? To get it running nicely, you can lower your stock offset table to where the values are roughly 1.4msec from 10.5v up to the highest voltage in the table, below 10.5v the msec should increase a decent bit.
also, short pulse adder (range it from 0.6 to 0.02)? or short pulse limit (1.0)? at least until we get some solid data for ya.
also, short pulse adder (range it from 0.6 to 0.02)? or short pulse limit (1.0)? at least until we get some solid data for ya.
Trending Topics
#8
TECH Fanatic
I bought the same injectors from Ebay and did not get any flow sheets with them. I would really appreciate any info on these injectors as well. Here is a link to the Ebay auction where I bought them.
http://www.ebay.com/itm/290680434159...84.m1497.l2649
http://www.ebay.com/itm/290680434159...84.m1497.l2649
#9
call Jon and ask for the data (have him look up your order) ; if he can't get it to you right then we can certainly get something to you in the following few days. Are those injectors disc, pintle, or ball ? To get it running nicely, you can lower your stock offset table to where the values are roughly 1.4msec from 10.5v up to the highest voltage in the table, below 10.5v the msec should increase a decent bit.
also, short pulse adder (range it from 0.6 to 0.02)? or short pulse limit (1.0)? at least until we get some solid data for ya.
also, short pulse adder (range it from 0.6 to 0.02)? or short pulse limit (1.0)? at least until we get some solid data for ya.
I have the hard data for these injectors now. thanks!
Carter
#10
TECH Fanatic
#11
TECH Fanatic