meatheadgn

iTrader: (1)

Can the high flow Edelbrock elbow #3849 that is advertised to fit up to 95mm TB be ported to accept the NW102 mm TB or other four bolt 102mm throttle bodies. I am ready to purchase the elbow and TB for a forced induction 408 and want to make sure before I pull the trigger.

meatheadgn

iTrader: (1)

Anybody have any idea if I can port this to accommodate the NW 102 TB?

meatheadgn

iTrader: (1)

I bought the elbow and it took a little porting but matched up perfectly after about 10 minutes of porting. The NW102 would bolt on and function perfectly but there was some mismatch that I needed to port out to ensure smooth flow.