How to test throttle body before install?
#1
Teching In
Thread Starter
Join Date: Dec 2015
Location: Connecticut
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
How to test throttle body before install?
Hello all, I have an 02 Corvette Z06 (LS6) and am upgrading to a FAST 102 and ported LS2 throttle body from my stock units.
I bought the LS2 throttle body used from somebody who also bought it used...and I therefore am running on faith that it's working properly.
Is there a way for me to test that it's functioning 100% prior to installing it? I have the LS6 to LS2 conversion connector on its way to me now.
I was thinking to simply unplug my factory unit, plug in the LS2 unit, and hold it while a friend pumps the gas pedal inside the car? That way I can see the blade hopefully open and close as it should?
I bought the LS2 throttle body used from somebody who also bought it used...and I therefore am running on faith that it's working properly.
Is there a way for me to test that it's functioning 100% prior to installing it? I have the LS6 to LS2 conversion connector on its way to me now.
I was thinking to simply unplug my factory unit, plug in the LS2 unit, and hold it while a friend pumps the gas pedal inside the car? That way I can see the blade hopefully open and close as it should?