LS1/85lb inj/walbro255/e85???
04-25-2016, 01:31 PM
#1
Registered User
Thread Starter
Join Date: Apr 2016
Location: Colorado
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
LS1/85lb inj/walbro255/e85??? I was wandering if a walbro 255lph in tank would be enough for 85lb injectors on e85?
Any info or advise would be gladly appreciated
Any info or advise would be gladly appreciated
05-05-2016, 02:34 PM
#5
TECH Enthusiast
Join Date: Jun 2010
Location: Illinois
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
I will be running 80's a Walbro 450 and hoping for 600 through an auto on E85. I have read that there are no issues running the 255 on E85, but you will most likely be limited to 400ish rwhp.
Some people have ran the 450 on 80's with E85 to almost 700rwhp, but they have been able to control the pressure going through the injectors a bit better.
A lot goes into the tune. My old 255 will be eventually added to the 450 once I plan to push it even further than the goals I currently have.
Some people have ran the 450 on 80's with E85 to almost 700rwhp, but they have been able to control the pressure going through the injectors a bit better.
A lot goes into the tune. My old 255 will be eventually added to the 450 once I plan to push it even further than the goals I currently have.