skipperbisket

iTrader: (4)

I'm having a 370" ironblock setup with 11* et heads, big solid roller, setup with a single plane victor jr. manifold with an elbow, nitrsous express plate kit etc. for the fuel system i have a sumped tank, weldon pump/filters, nasty performance rails, -10 feeds, -8 return, just curious what you guys think about injector size for the motor.

WS6FirebirdTA00

iTrader: (33)

what power are you expecting to make?

Matt@HSW

iTrader: (14)

I think you would be okay with a set of 42 or 60s.

Matt

Mike @ New Era

iTrader: (10)

It is important to know the projected power level to help choose the right flowrate . Just trying to make sure you get the right ones so you don't do it twice .

skipperbisket

iTrader: (4)

Eric at HKE says roughly 600 on motor, then a plate shot of 200 and possibly 300. the nitrous hit will have a stand alone fuel system so that shouldn't really come into play.

vitamanz

iTrader: (4)

go to aeromotive.com they have formulas to show you what # inj. you should run w/about an 80% duty cycle!