doing my fuel system, let me see some fuel rails
#1
doing my fuel system, let me see some fuel rails
Iam setting up my new fuel rails with a Edelbrock intake and I need top see what size hoses/fittings you guys are using and the way you are connecting them. Right now i have a two 90* elbow with 6an lines connecting to eachother on the front side of the rails. How do I route the back side of the rails, and connect it to my stock fuel lines. If you guys can post some pics. Do you think I need a fuel pressure regulator? I have 60lb injector and intank fuel pump.
#3
FormerVendor
Join Date: Mar 2006
Location: Hell AFB
Posts: 1,540
Likes: 0
Received 0 Likes
on
0 Posts
To run it back to your stock line you need to block off one of the backs(passenger), and then run a piece from the remaining rail into the special Russell fitting that clips onto the factory line.
To make it a return system, you would need to bypass the stock regulator and run a return line, typically this is used when the stock system is maxed out.
To make it a return system, you would need to bypass the stock regulator and run a return line, typically this is used when the stock system is maxed out.