tha joker

iTrader: (5)

in title....

I just bought injectors and didnt find outuntil to late that they didnt have o-rings so i need o-rings.

where can i get them

koolaid_kid

iTrader: (21)

Not familiar with that particular brand, but they should use stock orings.
I sugggest going to the dealer. They are expensive (I think around $20). But I purchased orings at an autoparts store and they were too thin. (Did a side-by-side comparison.)

Jammer

iTrader: (1)

I can send you the O-rings.. but they are used..for a few bucks, just get new ones...local dealer has them.. your welcome to a set or two of the many used ones I have (I tend to leave them in my tool box for some odd reason.

You'd be crazy to use old onesin my opinion..

SuperZ

iTrader: (2)

they didnt come with them?Mine did.Im sure you can get them from any local place or shop that sells the injectors

Old Geezer

iTrader: (3)

injectors??
I've cleaned, flowed, sold, LOTS of injs, new, and used. I can't remember that I ever had a new set that didn't come with o'rings.
Maybe call the supplier, and ask???

smokinHawk

iTrader: (48)

can you swap the stock ones on to the new injectors?

but id try calling the suppier and try to get some for it
they should have come with them

RDY2RUN

iTrader: (29)

Take a good look at them. I bought some 60 lb. motrons that, in the plastic, looked like they needed o-rings. I bought a set of o-rings from the dealer. Later on when I did the install, I found out they had o-rings on them already. Hope this helps.