second_2_none

iTrader: (6)

I'm sure this has been hit on a time or two, but I'm in Afghanistan and my internet is slow and it would be faster to just come out and ask instead of searching for hours. I have a 4 chanel car and about to buy a moser 12 bolt. If I purchase the rear end without ABS or TCS will it work on my car? Or is that something I will have to spend the extra money on? If it does work is there a way to clear the codes it will throw, with a dyno tune? Sorry if this is a beaten up subject and thanks for the answers and advice guys!

cbrrmike

iTrader: (10)

you can shut the tcs off and not have a light, but the abs light, and most likely the ebrake light will stay on...

NVR_SPDS

iTrader: (39)

When you delete the ABS, theres nothing you can tune out. You just have to take the bulb out or cover it up, so you dont see the ABS Inop light all the time.

second_2_none

iTrader: (6)

ok, if I get a rear end w/out abs and tcs will the abs on the front breaks work?

EPP

iTrader: (22)

No, the ABS will not work on the front brakes either. Bob

second_2_none

iTrader: (6)

ok cool, thanks guys!

omcar

iTrader: (10)

In my opinion you should give the Strange 12 bolt some consideration, especially if you are going to bolt up an adjustable torque arm.