Any of you guys have narrowed rear ends?
#2
wrencher
iTrader: (2)
Join Date: Aug 2002
Location: Chicagoland
Posts: 4,762
Likes: 0
Received 0 Likes
on
0 Posts
I have a 2nd gen F-body narrowed, & first off alot of work & money.
Tubed in the back, entire new rear suspension/back-halfed(coil overs) .
Have to unbolt the coil overs to get the rear to drop, & just to pull the tires off.
It drives like **** on the street, but if you want a big block to hook you gotta pay.
If your goin full on drag car W/1000 h/p do it.
Tubed in the back, entire new rear suspension/back-halfed(coil overs) .
Have to unbolt the coil overs to get the rear to drop, & just to pull the tires off.
It drives like **** on the street, but if you want a big block to hook you gotta pay.
If your goin full on drag car W/1000 h/p do it.
#3
10 Second Club
Thread Starter
I didn't mean tubbed(back-halfed),I ment narrowed rear.Theres a few memebers that have done this without cutting or major work.I don't recall which forum I read it from,but there was some info on some of the people that have done this to thier cars.Maybe those guys will chime in if they see this.
#4
10 Second Club
Thread Starter
Did i little search and found the forum.
https://ls1tech.com/forums/drag-racing-tech/118270-who-had-narrowed-their-rear.html
https://ls1tech.com/forums/drag-racing-tech/118270-who-had-narrowed-their-rear.html
#5
wrencher
iTrader: (2)
Join Date: Aug 2002
Location: Chicagoland
Posts: 4,762
Likes: 0
Received 0 Likes
on
0 Posts
Well that a nice set up, it wount be near as bad as a back half.
If your thinking rear end anyway, what's narrowed with shortened axles?
Bet there's a few sponsors that can do it no problem.
If your thinking rear end anyway, what's narrowed with shortened axles?
Bet there's a few sponsors that can do it no problem.