Gears & Axles Driveshafts | Rearends | Differentials | Gears | 12 Bolt | 9 Inch | Dana

?? for ones in the know

Thread Tools
 
Search this Thread
 
Old 04-11-2002, 01:37 PM
  #1  
LS1 Tech Administrator
Thread Starter
iTrader: (14)
 
Patrick G's Avatar
 
Join Date: Nov 2001
Location: Victoria, TX
Posts: 8,244
Likes: 0
Received 31 Likes on 27 Posts

Default Re: ?? for ones in the know

The SLP converter is going to be a little more streetable, but the ST3500 will have an edge when racing from a roll or a dead stop (but only by a little bit). Depends on how much you value streetability. Both are excellent and both will be a huge improvement over stock (at least 5 tenths off the 1/4 mile times with traction).
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
Old 04-12-2002, 12:58 AM
  #2  
11 Second Club
iTrader: (8)
 
SS SLP2's Avatar
 
Join Date: Jan 2002
Location: SILSBEE TX
Posts: 1,782
Likes: 0
Received 0 Likes on 0 Posts

Default ?? for ones in the know

need advice, looking at Yank converters http://www.converter.cc/general_moters.htm
under street/strip , looking at "slp 3300" with 2.2 str and
"super thruster 3500 " with 2.5 str , I not care about 25-50.00 diff in price, with mods in sig , which would your suggest or something different??
thanks for all input
Johnny
PS:: Will i need to reprogram the pcm or is it going to drop a code ??

<small>[ April 11, 2002, 02:16 PM: Message edited by: SS SLP2 ]</small>




All times are GMT -5. The time now is 10:27 PM.