WS.6 heads cam questions
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Dec 2010
Location: lehigh valley, pa
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
WS.6 heads cam questions
I have a 99 ws.6 thinking about running the 2.5.5.3 heads with the 228r cam..the car had the ls6 intake and 3.73 gears and its a m6....anyone else have similiar set up...that can tell me around what kind of power i will make as well as any track times ppl have with similiar set up.....also im open for recommendations?
Thanks, matt
Thanks, matt
#2
12 Second Club
iTrader: (13)
Join Date: Nov 2004
Location: 707
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
I had 5.3 Patriot heads, crane 228/588 (don't remember the exact specs) 3:42 gears, LS6 intake in an auto 97 vette and ran 11.80's. We're about the same elevation and my name is Matt. You can't go wrong...
#4
LS1Tech Premium Sponsor
iTrader: (2)
That number is quite common with that setup, but keep in mind that it could vary plus or minus some depending on the tune, what dyno its on, what supporting mods, and etc... Its a very successful combo, which makes it very popular!
__________________
NOW OFFERING TSP BY YANK CONVERTERS
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
NEW NUMBER (512)863-0900