5.3 intake manifold to ls1 manifold
10-15-2013, 01:02 PM
#1
Teching In
Thread Starter
Join Date: Oct 2013
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
5.3 intake manifold to ls1 manifold Doing a 5.3 swap into a 240sx but I want to put a ls1 intake manifold on the5.3 and eventually an ls6. I've read I need to put an ls1 water pump on it to Make the throttle body fit. Also some stuff about the idler pulley bracket injectors and fuel rails. Any help and information on this is appreciated! Thanks!
10-16-2013, 01:21 AM
#2
Teching In
Join Date: Sep 2013
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Hey, I'm doing a similar swap now. I know if you have a drive by cable you will need a camaro water pump and spacers. You will also need to relocate the idler pulley and purchase a new belt. Goto dirty dingo website and they have pictures, instructions, and the correct parts and part numbers that you'll need.
