SES bulb burnt out...
#1
Staging Lane
Thread Starter
Join Date: Mar 2005
Location: Lynn MA
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
SES bulb burnt out...
Does any one know...
A) How to replace it?? I know how to take the gauge cluster out but im not sure where the bulb is and stuff. The write up i saw was for the other bulbs (tach, speedo)
B) What bulb number it is??
Thanks
Greg
Oh and i know its the bulb because it doesnt turn on when i start the car (or put the key in the on posistion)
A) How to replace it?? I know how to take the gauge cluster out but im not sure where the bulb is and stuff. The write up i saw was for the other bulbs (tach, speedo)
B) What bulb number it is??
Thanks
Greg
Oh and i know its the bulb because it doesnt turn on when i start the car (or put the key in the on posistion)
#4
TECH Senior Member
iTrader: (14)
But for real, once you take the cluster out there will be small plastic clips on the back that jut out. They rotate and pull out (just like your headlight/blinker bulbs) to expose each bulb you need. They may be hard to turn so be prepared to use a bit of force to turn them and get them out. Once you get the cluster out and look, you'll see what I'm talking about. The bulb for them is a 194 and you basically figure out which bulb it is through common sense.
#5
Staging Lane
Thread Starter
Join Date: Mar 2005
Location: Lynn MA
Posts: 78
Likes: 0
Received 0 Likes
on
0 Posts
okay thanks....yeah i wish i could leave it that way. my car wont pass inspection (threw 9 codes!!) 2 for cam pos sensor, 1 for egr, 1, for some electric crap, and 5 for running lean.... but i have a vaccum leak that im fixing this week and the cam pos sensor was recently fixed so im gonna get them cleared so hopefully thatll fix them