Codes
#1
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Aug 2005
Location: Florida
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Codes
My SES light is on,just used the computer at advance and got two codes
DTC (codes)
P0446
EVAP emission
control system
vent circuit malf
P1416
Manfacurer contrl.
Auxiliary emission
controls
What do i need to do?
Thanks
JD
DTC (codes)
P0446
EVAP emission
control system
vent circuit malf
P1416
Manfacurer contrl.
Auxiliary emission
controls
What do i need to do?
Thanks
JD
#2
TECH Senior Member
When I had P1416 it was a clogged passenger side air check valve (the black disc shaped valve in between the metal pipe coming off the exhaust/then connects with a clamp to the air hose - just above the #4 cyl coil pack). GM PN is 12565503 but cheaper from a parts store, think I paid about $15.
#4
10 Second Club
iTrader: (28)
Originally Posted by JDJP
My SES light is on,just used the computer at advance and got two codes
DTC (codes)
P0446
EVAP emission
control system
vent circuit malf
P1416
Manfacurer contrl.
Auxiliary emission
controls
What do i need to do?
Thanks
JD
DTC (codes)
P0446
EVAP emission
control system
vent circuit malf
P1416
Manfacurer contrl.
Auxiliary emission
controls
What do i need to do?
Thanks
JD
Rip all your emissions crap out.....that'll fix it.
#5
TECH Senior Member
P1416 sets the light on the second consecutive cold start failure. If it's been a while since you changed plugs shouldn't have anything to do with it. It's easy to R&R the check valve, take it off and tap it on your bench - bet it's full of carbon deposits like mine was - if it is I'd replace it.
#6
TECH Apprentice
Thread Starter
iTrader: (2)
Join Date: Aug 2005
Location: Florida
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2001NBMZ28
P1416 sets the light on the second consecutive cold start failure. If it's been a while since you changed plugs shouldn't have anything to do with it. It's easy to R&R the check valve, take it off and tap it on your bench - bet it's full of carbon deposits like mine was - if it is I'd replace it.
anyone know what to do about the other code?