estegeme

so i get up and get ready for work this morining, go out, hit the key and she starts just like normal. than dies. so i start it again, it dies. so i do it again and with a lil gas it would stay running but id have to get it to about 2000 rpms. than when i let off itd try to idel at about 250-500 rpms and die.

but i jsut got home from work. and it started right up runs fine. has a lil bit of a miss but its always seems to have that. i need plugs and wires i know there way over due for changing. but what else could casue this?

sandro arellano

iTrader: (3)

how many miles do you have on your setup? it may be that if they are way over do, it may be causing this......

estegeme

95000, all stock. im guessing they are the oringal wires. at least they are stock replacements. i got it with 90000 and they were on there

jlrz28

iTrader: (7)

Just go with a good (ngk) platnum or iridium plug and some msd wires. Ive been running these for a while and have had good luck.

estegeme

i was gonna go with ngk and msd wires. but why would it not start that one time, and i havnt had a prblem cents