Window problem
07-13-2007, 03:20 PM
#2
TECH Senior Member
I always crack my drivers side window open a couple inches by just tapping the down switch 2 or 3 times - sometimes it starts going all the way down if I hold it too long, so I just hit UP to stop it. I like the feature, comes in handy going through drive-throughs.
07-13-2007, 05:51 PM
#3
On The Tree
Thread Starter
iTrader: (6)
Join Date: Oct 2006
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
the problem is my window will not roll up i but a new window motor in and when i pluged the switch it it will not do anything so i figure the body control module still thinks it needs to be rolled down so i dont know what else to try
07-13-2007, 06:15 PM
#4
TECH Senior Member
When my passenger side window bit the dust it wouldn't work with either door switch. Worked with the passenger side only after a new motor - replaced the drivers side dual switch and worked fine. Got a buddy who will let you plug in their drivers side door switch? Don't think it's the BCM.