PCV/EGR writeups?
10-14-2003, 08:40 PM
#1
TECH Enthusiast
Thread Starter
Join Date: Dec 2002
Location: College Staion, Texas
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
PCV/EGR writeups? I'm sure this has been answered a thousand times, but, where can I find a good write up of the EGR and AIR removal? I'm going LT's friday, and I need to know what all I need before then, i.e. block off plates... They're pacesetters... TIA.
p.s. Title is wrong, not pcv, but air...
p.s. Title is wrong, not pcv, but air...
10-15-2003, 01:23 AM
#3
Re: PCV/EGR writeups? Not much to write up . . . just yank off vacuum line and cap off the nipple on the solenoid valve, then trash the rest of the system. I just did it last weekend. I didn't need block off plates because I ordered off-road headers.
10-15-2003, 01:33 AM
#4
TECH Enthusiast
Thread Starter
Join Date: Dec 2002
Location: College Staion, Texas
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Re: PCV/EGR writeups? Word, that work for the AIR system, now for the EGR system, how many plates do I need? I know 1 for the intake manifold, but what else down the line?
10-15-2003, 02:32 AM
#6
TECH Enthusiast
Thread Starter
Join Date: Dec 2002
Location: College Staion, Texas
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Re: PCV/EGR writeups? Well, I'm going LT's and ORY, so the exhaust side is kinda irrelevant. I was more curiouws about the 'thing' that the EGR goes into after the manifold, I'm not sure what it is.
10-17-2003, 02:24 AM
#7
Staging Lane
Join Date: Jun 2003
Location: Decatur, In
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
Btw, i bought the plates premade from Speed Inc, they were 14 bucks and they look AWESOME...very nicely done.
10-17-2003, 02:57 AM
#10
TECH Resident
Join Date: Jul 2003
Location: Marysville, OH
Posts: 834
Likes: 0
Received 0 Likes
on
0 Posts
Re: PCV/EGR writeups? By far the best write-up on the MOD. I did mine using that site.
