Fast Intake Install question
#1
Teching In
Thread Starter
Join Date: Jan 2008
Location: ottawa,ontario
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Fast Intake Install question
hey , i just recieved my new fast intake i have a 98 ws6 and i attached a pic of what my question is about.. the hose that comes out of there, someone told me i could install the intake without putting that hose in, now my question is, how can it be done, and is it worth the head ach? thanks!
tony
tony
#3
#4
TECH Junkie
iTrader: (5)
Join Date: Feb 2007
Location: Key West, Florida
Posts: 3,183
Likes: 0
Received 0 Likes
on
0 Posts
no way to relocate it. you have to either delete it all or keep it.
they changed the cam slightly for 01/02, along with the LS6 intake...and were able to still make more power, without any increased emissions.
they changed the cam slightly for 01/02, along with the LS6 intake...and were able to still make more power, without any increased emissions.
#6
You could maybe gain a HP or two given the fact that the EGR tube goes through the intake and sits in the TB opening. There is a thread on here somewhere on how to modify the tube. Will it be a noticeable gain no not at all but then again every little bit counts somewhere.