Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Need Help

Thread Tools
 
Search this Thread
 
Old 04-05-2013, 05:54 PM
  #1  
11 Second Club
Thread Starter
iTrader: (2)
 
work in progress's Avatar
 
Join Date: Feb 2002
Location: Texas
Posts: 918
Likes: 0
Received 1 Like on 1 Post

Default Need Help

I converted to an LS3 setup and need help running down a problem. Car runs fine at part throttle below 3600, as soon as you get in it it breaks up and won't pull (does seem to clean up a bit around 5k). I swapped coil packs, new plug wires, new plugs, got rid of the crappy ev1 adapters for the racetronix adapters and chased every wire I could possibly think of. All grounds seem good and no broken wires. Maybe a bad cam sensor? It only runs bad under load. Fuel pressure is 58 lbs at idle and under load. MAF reads correctly according to PatG. I don't know what else to try.
Old 04-05-2013, 09:04 PM
  #2  
TECH Senior Member
iTrader: (8)
 
Blackpanther99's Avatar
 
Join Date: Sep 2012
Location: Baytown, TX
Posts: 6,963
Received 4 Likes on 4 Posts

Default

Whats your RPM at idle?
Old 04-05-2013, 11:48 PM
  #3  
11 Second Club
Thread Starter
iTrader: (2)
 
work in progress's Avatar
 
Join Date: Feb 2002
Location: Texas
Posts: 918
Likes: 0
Received 1 Like on 1 Post

Default

950 why?



Quick Reply: Need Help



All times are GMT -5. The time now is 04:26 AM.