Last edit by: IB Advertising
See related guides and technical advice from our community experts:
Browse all: Chevrolet Camaro or Pontiac Firebird Air Intake and Exhaust Guides
- Chevrolet Camaro 2010-2015: Intake Manifold Reviews and How-to
Review and how-to
Browse all: Chevrolet Camaro or Pontiac Firebird Air Intake and Exhaust Guides
Review and install guide for the MSD Atomic AirForce intake manifold.
#21
Guys, I literally just walked in the door a few moments ago after spending the weekend in New Orleans with the wifey. Needless to say, I'm exhausted. Give me a few minutes and I'll set the intake on the block and put the shock tower brace on. (we have shocks, not struts. )
Not sure how to reply on my phone, but oh well.
#23
To explain the pic I posted, it looks like the shock tower brace I have, a very old BMR one, hits the top of the intake right now. But I don't have the motor bolted up to the kmember right now, so that could change.
I want to try and work on the car tonight, but I'm Mr. Mom for the next three days, so it might now happen.
#24
10 Second Club
iTrader: (8)
There is, but I haven't gotten that far... I will have to address all that in the coming days.
To explain the pic I posted, it looks like the shock tower brace I have, a very old BMR one, hits the top of the intake right now. But I don't have the motor bolted up to the kmember right now, so that could change.
I want to try and work on the car tonight, but I'm Mr. Mom for the next three days, so it might now happen.
To explain the pic I posted, it looks like the shock tower brace I have, a very old BMR one, hits the top of the intake right now. But I don't have the motor bolted up to the kmember right now, so that could change.
I want to try and work on the car tonight, but I'm Mr. Mom for the next three days, so it might now happen.
#28
A good 150-200hp... well, that's from 70 additional cubes (346-416), bigger headers (1 3/4-1 7/8), D1SC to F1A, and a FAST 90mm to this MSD intake.
I lost my motor back in September and have been planning my rebuild all winter, this intake was another piece in that puzzle.
I lost my motor back in September and have been planning my rebuild all winter, this intake was another piece in that puzzle.
#29
The Scammer Hammer
iTrader: (49)
Brien...
Ship it to me. I'll do a back to back
I'll take the Vette to Geoff, do another baseline on the dyno, change them on the dyno, and do a few more pulls, both untuned and tuned (who the hell WOULDNT tune for a manifold though).
I'm kidding man. I gotta shoot you a PM real quick though. Got a question for you...
Ship it to me. I'll do a back to back
I'll take the Vette to Geoff, do another baseline on the dyno, change them on the dyno, and do a few more pulls, both untuned and tuned (who the hell WOULDNT tune for a manifold though).
I'm kidding man. I gotta shoot you a PM real quick though. Got a question for you...
#33
Brien...
Ship it to me. I'll do a back to back
I'll take the Vette to Geoff, do another baseline on the dyno, change them on the dyno, and do a few more pulls, both untuned and tuned (who the hell WOULDNT tune for a manifold though).
I'm kidding man. I gotta shoot you a PM real quick though. Got a question for you...
Ship it to me. I'll do a back to back
I'll take the Vette to Geoff, do another baseline on the dyno, change them on the dyno, and do a few more pulls, both untuned and tuned (who the hell WOULDNT tune for a manifold though).
I'm kidding man. I gotta shoot you a PM real quick though. Got a question for you...
Once I do that, I can look at doing testing.
The following users liked this post:
chadfarr (12-20-2022)
#35
One difference I noticed right away is the addition of 3 support braces that mount to the top and bottom of the intake, which will aid in running boost. That wasn't done with the models at SEMA.
#36
Right in the instructions, they state that if running a manual throttle body, you will need to figure out a mount. Who knows, maybe they will or are working on that at this time, and will have something in the future, I don't know.
One difference I noticed right away is the addition of 3 support braces that mount to the top and bottom of the intake, which will aid in running boost. That wasn't done with the models at SEMA.
#40
TECH Resident
You got to wonder why little things like that are missing? I can't imagine it'll take long to develop on their end, but I sure as hell hope they don't plan on charging you for one!