camonlyss

iTrader: (2)

guys im putting a 6.0 in my car, cam, 243 heads, 92mm fast intake, 17/8 headers etc. I have a 3inch cutout in the exhaust after the ypipe about halfway down. When the exhaust starts to go over the axle, theres a clamp and I can disconnect it there. Does anyone make a muffler tip setup that connects there instead of going all the way up to the Y pipe and I have a magnaflow catback that is just so quiet on my car and I feel like its restrictive.

Orange Juice

iTrader: (3)

Instead of a band clamp at the over the axel have a bolted flange welded in then you can well a matching flange to a tip for running without the rear exhaust.

camonlyss

iTrader: (2)

I already have a cutout I just feel like my muffler is so restrictive. I don't know how good the magnaflow setup is

Sladester2

iTrader: (1)

with the cutout it isnt too restrictive.. 3 inch piping should be good up to about 500hp through a y pipe so I would say you are good