Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Need information for EGR

Thread Tools
 
Search this Thread
 
Old 06-02-2004, 09:06 PM
  #1  
TECH Enthusiast
Thread Starter
 
mooleyz28's Avatar
 
Join Date: May 2004
Location: Northern Illinios
Posts: 622
Likes: 0
Received 0 Likes on 0 Posts
Default Need information for EGR

I was going to buy long tubes for my car. Pacesetter raceing ones. They dont have egr or air hookup to them... I have a 99 z28 and i have egr. (not sure what the !air is though). I was wondering, if i block the egr off what will happen to the car? Should i just buy reg headers with egr available? What do you suggest?

P.S. What is it when people say... !AIR?
Old 06-02-2004, 09:50 PM
  #2  
TECH Fanatic
iTrader: (13)
 
MM98's Avatar
 
Join Date: Dec 2003
Location: Okc,OK
Posts: 1,455
Likes: 0
Received 1 Like on 1 Post

Default

I have those same headers on my 98' Z & blocking off the EGR will set the SES light(service engine soon)... I ran mine for about 3-4 months with the EGR & AIR off with no problems; then I eventually had the codes deleted... To answer your other question; when someone uses the term !AIR, they're refering to the air pump & hoses... If you get these headers you will have to take that crap off which isn't difficult... Look on your manifolds & you will notice a hose that is bolted on to each one, those are your AIR hoses.

Goodluck with your mods,
Mike.




All times are GMT -5. The time now is 10:56 PM.