GHall8788

Trying to get a response. Picking up intake tommorrow and need to make sure it will work. Going to be using trickflow genx heads. Found a ported fast 92, ported for ai 232 heads. Will this work for the heads im wanting to use? Or cause air turbulence. For the trickflow heads, The intake runner is 215cc. Exhaust port is 80cc. Its these http://m.summitracing.com/parts/tfs-k306-515-460

KCS

iTrader: (20)

It will work, it's not like the engine won't run because of a little mismatch in the runners. I doubt it will really have much of an effect though if that's what you're worried about.

GHall8788

Even if the intake ports are larger than the heads?

KCS

iTrader: (20)

Yeah.