NH_Z06

iTrader: (3)

I am doing A H/C/I on my '00 WS6 and I am going with a LS6 intake for now, until I can pick up a FAST 102 later this year. I want to be sure whatever steam crossover kit I get will work with both intakes. What is everyone using?

codyvette

iTrader: (24)

Usually just an LS6 kit from somewhere like the WS6store but any of the after market kits will work for both intakes.

farmington

iTrader: (14)

consider getting a rear crossover to use with the LS6 steam piping in the front. You can use your LS1 crossover with the LS6 intake.

z-maro

iTrader: (18)

I'm planing to run a truck crossover in the rear and LS6 in the front. Gotta do some test fitting with the fast 102 now that I have my heads on. The nitrous outlet steam vent system looks really nice but I just can't justify paying $250 for that..

NH_Z06

iTrader: (3)

I ended up ordering the LS6 front tube. for some reason I thought I saw somewhere it was an issue with he FAST 102. Either way I will use it for the LS6 and make it work on the 102 when the time comes. Thanks for the help.

z-maro

iTrader: (18)

My LS6 front will not fit under the snout of the 102 as it sits. I will be attempting to bend it to make it work. If I don't have success with that I can always cut it on each side a few inches from the steam ports and connect them together with a flexible tube.