LS1SS4ever

Want GMMG exhaust with this looks for the rear. Can i do it? will it cost me more? how much it wil cost?

bigMAC

I know it has been done before but I don't know how much it costs.

LS1SS4ever

Is it possible to install this tip in any type of exhaust?

bigMAC

I guess you can but you have to take it to an exhaust shop and get it cut and welded to fit.

35thls1ss19

iTrader: (1)

I just put them on my 02 ss and the set up w/ out mufller from slp( the tips, 90 degree angles, and rear shroud) cost 550 shipped, 72$ shipping and it fit right up to the gmmg but hangs a little low. The tail pipes might have to be bent up a little. But i put brackets on mine from the 90 degree angles to the fram to pull it up and it work perfect. Also it cost 50$ to get the shroud painted. So your looking around 600- 625

LS1SS4ever

So if I buy GMMG for $700 and want to convert it to this shape I add $550 so the total 1250 thats will cost me alot

MeentSS02

iTrader: (11)

Those tips can be used on any exhaust if you get a good exhaust shop to do the work...I have those CME tips mated up to my Hooker exhaust. Looks just like it did from the factory...

xp3nd4bl3

"Poltergeist" did this with his CME and GMMG. Turned out awesome!!

Here's a snap from his website.

http://poltergeist.us/page/SS/Engine/Pics/SS_GMMG_1.jpg

Poltergeist

Just watchout with the CME tips. They can be broken easily if the shop is not carefull.

JamRWS6

I thought my Corsa tips weighed a lot...I bet those CME tips weigh a ton!