Just got my headers...
11-15-2005, 09:01 PM
#1
TECH Apprentice
Thread Starter
Join Date: Dec 2004
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
Just got my headers... so i got my headers just now. Only i look and it has EGR on it. I order the 2001-2002 headers from Pacesetter. I thought they only had the AIR hook ups? The instructions are for 98-00. I made a block off plate already for the EGR. Will the headers still fit and work on my 02? Thanks!
11-15-2005, 09:15 PM
#3
TECH Apprentice
Thread Starter
Join Date: Dec 2004
Posts: 356
Likes: 0
Received 0 Likes
on
0 Posts
shweeet. Now i just need to get to a lift. A jack is not going to cut it. Just removed AIR. Boy that was a bitch. the 30 min uninstall was more like 90 mins. Took me 20 mins just to get the solinoid bracket bolt out.
11-15-2005, 09:32 PM
#4
TECH Apprentice
iTrader: (8)
Join Date: Aug 2005
Location: St. Louis, MO
Posts: 347
Likes: 0
Received 0 Likes
on
0 Posts
Crap, I just ordered some pacesetter LT's for my 01. I hope I don't get the wrong ones. Good luck on the install.
Last edited by BatmobileSS; 11-15-2005 at 10:37 PM.
Trending Topics
11-16-2005, 11:20 AM
#8
They have 3 sets that they sell. One for 98-99(72C2253) with AIR/EGR, 2000-2002(72C2255) with ARI/EGR and the off-road version(72C2256). If you have an 01 and ordered the 2000-2002 with emmissions then you will get both the AIR and EGR but should have a block-off plate with it.
Jon
Jon
11-16-2005, 12:10 PM
#9
TECH Fanatic
iTrader: (2)
Join Date: Aug 2005
Location: Walker, La.
Posts: 1,005
Likes: 0
Received 0 Likes
on
0 Posts
i had to jact the motor up on the driver side to get that header in. tighten the motor mount bolts back before you bolt up the header.i had to remove the starter so i could grab the oil dipstick and remove it on the pass side.
