another intake question
#1
12 Second Club
Thread Starter
Join Date: Mar 2004
Location: Columbus
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
another intake question
I have a forged 346 w/ported heads flow@300 at .600,hooker lt's,6 speed,moser 9",300hp direct port nos. I am debating between my LS6 intake and 78mm tb or a victor jr. w/elbow and a fast 90mm.
Are there any benifits/disadvantages to the victor or should I stick with my LS6? any input will be helpfull b/c I have to make a decision in a few days so I can order my cam.
Thanks,John
Are there any benifits/disadvantages to the victor or should I stick with my LS6? any input will be helpfull b/c I have to make a decision in a few days so I can order my cam.
Thanks,John
#2
That's what she said...
iTrader: (8)
I would go with the FAST 90/NW 90. If you're running a 300 shot, the direct port bosses and the burst panels will work nicely for you. Plus it's easy to tune and lots of people have done them with no issues. The FAST makes great power, but they seem to bottleneck the system at the mid 500rwhp mark on a N/A car.
A victor w/ an elbow would be neat though.
A victor w/ an elbow would be neat though.
#3
12 Second Club
Thread Starter
Join Date: Mar 2004
Location: Columbus
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
I was thinking about doing the victor jr. b/c I dont have the money for a fast 90/90 with fuel rails. Would the victor jr. be an improvement over the LS6? I would like to do a fast but I am thinking about going forced induction next year.