Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

A/C Help

Thread Tools
 
Search this Thread
 
Old 03-25-2007, 11:29 AM
  #1  
Teching In
Thread Starter
 
ciws20mm's Avatar
 
Join Date: May 2006
Location: Georgia
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default A/C Help

Okay, I hope this is the right forum. My A/C will not blow out of the upper vents. Anyone have any experience with this.
Old 03-25-2007, 11:36 AM
  #2  
TECH Senior Member
iTrader: (4)
 
GuitsBoy's Avatar
 
Join Date: Apr 2003
Location: Long Island, NY
Posts: 6,249
Received 3 Likes on 3 Posts

Default

Originally Posted by ciws20mm
Okay, I hope this is the right forum. My A/C will not blow out of the upper vents. Anyone have any experience with this.
Check to make sure the vacuum tube has not come off the back of the intake manifold. The air controls are vacuum operated and thats where the vacuum feeds from.
Old 03-25-2007, 11:41 AM
  #3  
Teching In
Thread Starter
 
ciws20mm's Avatar
 
Join Date: May 2006
Location: Georgia
Posts: 27
Likes: 0
Received 0 Likes on 0 Posts
Default

can you tell me where it comes off of the intake and where it plugs into the A/C?
Old 03-25-2007, 12:26 PM
  #4  
12 Second Club
iTrader: (52)
 
89Formulaws6's Avatar
 
Join Date: Mar 2006
Location: Michigan
Posts: 699
Likes: 0
Received 0 Likes on 0 Posts
Default

does your heat do the same thing? sounds like the mode doors
Old 03-25-2007, 12:36 PM
  #5  
TECH Senior Member
iTrader: (4)
 
GuitsBoy's Avatar
 
Join Date: Apr 2003
Location: Long Island, NY
Posts: 6,249
Received 3 Likes on 3 Posts

Default

Its a small fitting around the back passengers side of the intake. Rubber fitting at the end of thin rigid vacuum hose. It runs down and out of sight so I dont know where it breaks through the firewall exactly, but its probably the connection behind the intake. Atleast something to check.




All times are GMT -5. The time now is 09:57 AM.