Best place to mount 02 bung?
04-25-2007, 12:44 AM
#2
TECH Veteran
iTrader: (2)
Join Date: Nov 2002
Location: WestTexas
Posts: 4,274
Likes: 0
Received 0 Likes
on
0 Posts
O2 Sensor Location
Sensor must be mounted between the engine and the catalytic converters (in application where they are used). If no catalytic converters are used, then the sensor should be close to the hedder collector, where the exhaust is hot and each cylinder is represented.
The O2 sensor must be installed in the side or top of the exhaust pipe. The installation angle of the Bosch wideband O2 sensor should be inclined at least 10ƒ towards horizontal (electrical connection upwards). Thus preventing the collection of liquids between sensor housing and sensor element during the cold start phase.
Sensor must be mounted between the engine and the catalytic converters (in application where they are used). If no catalytic converters are used, then the sensor should be close to the hedder collector, where the exhaust is hot and each cylinder is represented.
The O2 sensor must be installed in the side or top of the exhaust pipe. The installation angle of the Bosch wideband O2 sensor should be inclined at least 10ƒ towards horizontal (electrical connection upwards). Thus preventing the collection of liquids between sensor housing and sensor element during the cold start phase.
04-27-2007, 03:47 PM
#5
Originally Posted by 98camaroLS1M6
I meant for a wideband A/F sensor.
Read the instructions that came with it.
They will say between 3 and 9 o'clock with 12 o'clock being ideal (but most impractical). never mount it at 6 o'clock.
04-27-2007, 08:37 PM
#6
TECH Addict
Thread Starter
iTrader: (35)
Join Date: Dec 2005
Location: Cherry Hill, NJ
Posts: 2,373
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 8a8mfh
I think this was understood.
Read the instructions that came with it.
They will say between 3 and 9 o'clock with 12 o'clock being ideal (but most impractical). never mount it at 6 o'clock.
Read the instructions that came with it.
They will say between 3 and 9 o'clock with 12 o'clock being ideal (but most impractical). never mount it at 6 o'clock.
