jlashley2001ss

iTrader: (5)

ok i talked to my exhaust guy and was going to order 2 magnaflow 4" mufflers 2.5" inlet/outlet to replace my spiral flows, but of course he deals directly through Magnaflow. Needless to say way too much money where as i know i can get them cheaper from summit racing. What is exact muffler is it that i need(part # too would be nice)? If you guys could help me with this it would be great.

Im trying to quieten it down and eliminate the drone/rasp that im having with the spiral flows over the axle.( setup in sig.) TIA guys!!

jlashley2001ss

iTrader: (5)

ttt guys... i know you guys know the mufflers i need

HavATampa

iTrader: (49)

Have you been on Summit's site to check? They have one of the easiest sites to narrow down your options. I put in Magnaflow, 4" round, 2.5" inlet and outlet and came up with 4 part numbers. Just decide how long and what finish.

MPE-14416 -14" body and is polished
MPE-10416 -14" body and is a natural finish
MPE-10426 -18" body, natural
MPE-10436 -22" body, natural

jlashley2001ss

iTrader: (5)

thanks bro! which one would be the quietest muffler but still sound good with my setup?

HavATampa

iTrader: (49)

NP. I don't have anything to go by but I would guess the bigger/longer the muffler body, the quieter the muffler. Some guys are stuffing 6" round mufflers under the rear bumper, might check on those too. Should be even a little quieter than the 4".

jlashley2001ss

iTrader: (5)

went with 4" mufflers part number 10416. thanks for the help and comments are welcome on my selection.