QTP headers installed this weekend
#1
On The Tree
Thread Starter
Join Date: Mar 2003
Location: Austin, Texas
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
QTP headers installed this weekend
I know the wait has been very long for most, but I think that those who waited will be happy they did. I installed them this weekend. They look great and fit even better. Granted I did install them on the LS1/T56 swap I am doing to my 96 Impala SS. I am very happy with them. This is another application for Barry to consider for these headers.
Another happy QTP customer
Another happy QTP customer
#2
Re: QTP headers installed this weekend
What kind of gains did you see??? Is your car mostly stock or modified? Also if you went with the 1 3/4" primary did you lose very much botttom end? THanks for the help.
Bonestock
Bonestock
#5
Re: QTP headers installed this weekend
Congrats...when can we see some dyno #'s?
As soon as Barry & QTP get a good stock of these things I'll be placing the order....don't want to be waiting forever like you guys had to.
As soon as Barry & QTP get a good stock of these things I'll be placing the order....don't want to be waiting forever like you guys had to.
#6
On The Tree
Thread Starter
Join Date: Mar 2003
Location: Austin, Texas
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
Re: QTP headers installed this weekend
Unfortunately I will not have any dyno numbers any time soon. As I mentioned this is going into my 96 Impala SS LS1/T56 swap. The LS1 is a 2001 Camaro SS engine w/6k miles. I am installing a CC 216/220 525/532 114 cam, 918 springs, Ti retainers, 160 degree thermostat, LS6 valley cover, SLP MAF (did not have a stock MAF) and Spec Stage 2 before the final engine install. I am doing a bunch of other thinks like new Eaton and 4.10 gears at the same time. I plan on a little spray down the road as well.
My understanding is that Barry is really get production ramped up, so the waits should be much shorter going forward.
My understanding is that Barry is really get production ramped up, so the waits should be much shorter going forward.