Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Reverse locked out after LT install

Thread Tools
 
Search this Thread
 
Old 03-30-2008, 08:06 PM
  #1  
On The Tree
Thread Starter
 
ballhawkdawk's Avatar
 
Join Date: Nov 2007
Location: West Chester, PA
Posts: 199
Likes: 0
Received 0 Likes on 0 Posts

Default Reverse locked out after LT install

I can get it in reverse but it takes some pressure. I have no problem moving it up.. only moving it over. It's as if it's locked out. Any ideas?
Old 03-30-2008, 08:08 PM
  #2  
TECH Apprentice
iTrader: (6)
 
Da Swami's Avatar
 
Join Date: Sep 2006
Location: UCLA
Posts: 330
Likes: 0
Received 0 Likes on 0 Posts
Default

Messed up the lockout solenoid on the pass. side of the transmission?
Old 03-30-2008, 08:17 PM
  #3  
On The Tree
Thread Starter
 
ballhawkdawk's Avatar
 
Join Date: Nov 2007
Location: West Chester, PA
Posts: 199
Likes: 0
Received 0 Likes on 0 Posts

Default

This could be it. Apparently that's the same solenoid that controls the skip shift.. and that has no longer shown up either.
Old 03-30-2008, 09:24 PM
  #4  
TECH Fanatic
iTrader: (23)
 
dlove's Avatar
 
Join Date: Sep 2005
Location: Fort Worth
Posts: 1,449
Likes: 0
Received 1 Like on 1 Post

Default

you melted the wiring on the passenger side near the exhaust. i belive it is the eng control fuse or something. check it and it will be blown. fix the wiring and replace the fuse and your set
Old 03-31-2008, 09:07 AM
  #5  
TECH Senior Member
 
2001NBMZ28's Avatar
 
Join Date: Dec 2001
Location: Jacksonville, FL
Posts: 5,399
Likes: 0
Received 3 Likes on 3 Posts

Default

Check the ENG SEN fuse, if it's blown make sure one of the 02 wires isn't melted/arcing on an LT somewhere. Usually the open fuse will throw P0102 for the MAF.




All times are GMT -5. The time now is 08:10 PM.