Exhaust Problem
08-30-2008, 02:39 AM
#1
Exhaust Problem My Kooks headers have been leaking for about 3 months now and I finally broke down to pull them off and fix them. One of the air fittings broke off, and I filled it in with mig the best I could on the car, but it still leaks there and along the flanges on both sides.
I got the passenger off no problem, but I cant get the drivers off. I think that when I had dual cutouts welded into the y-pipe the guy may have penetrated too deep and welded to the header, needless to say it wont come off. The car is in my apartment parking lot and I cant lift it high enough to take off the header and pipe at the same time. What should I do if I cant get it off?
This is on a 2001 fbody M6 with an iron 402 and l92 heads.
I got the passenger off no problem, but I cant get the drivers off. I think that when I had dual cutouts welded into the y-pipe the guy may have penetrated too deep and welded to the header, needless to say it wont come off. The car is in my apartment parking lot and I cant lift it high enough to take off the header and pipe at the same time. What should I do if I cant get it off?
This is on a 2001 fbody M6 with an iron 402 and l92 heads.
08-30-2008, 02:56 AM
#2
TECH Addict
iTrader: (76)
Join Date: May 2005
Location: SoCal
Posts: 2,976
Likes: 0
Received 0 Likes
on
0 Posts
Can someone weld the air fitting without the header being removed?
I didn't even take a chance with the AIR/EGR fittings on my headers. I had them cutoff and welded shut
I didn't even take a chance with the AIR/EGR fittings on my headers. I had them cutoff and welded shut