Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Lifter rattle???

Thread Tools
 
Search this Thread
 
Old 10-19-2008, 04:48 PM
  #1  
Teching In
Thread Starter
 
UCAZO6's Avatar
 
Join Date: May 2007
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default Lifter rattle???

I just had a lg G5X3 on a 114 put in my 01 Z06 with about 70k miles. It still needs to be tuned, but I have a lot of lifter rattle??? Car runs fine! Just wasnt a rattle this loud there before! Any advice from anyone??? Was reading where the lifters may not have been bled down properly???
Old 10-19-2008, 06:29 PM
  #2  
TECH Addict
 
DaddySS's Avatar
 
Join Date: Dec 2001
Location: Bergen County, NJ
Posts: 2,907
Likes: 0
Received 1 Like on 1 Post

Default

You'll have describe lifter rattle a little better. I assume you changed the springs and the pushrods?
Old 10-19-2008, 10:12 PM
  #3  
11 Second Club
iTrader: (18)
 
01blackformula's Avatar
 
Join Date: Jan 2006
Location: waco,tx
Posts: 96
Likes: 0
Received 0 Likes on 0 Posts

Default

No push rods just new spring and the cam, and heads were never removed...




All times are GMT -5. The time now is 05:01 PM.