Need clarification on REV 1116 spring issue
#1
TECH Apprentice
Thread Starter
Join Date: Nov 2001
Location: Lexington, SC
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Need clarification on REV 1116 spring issue
I hear you need new valve seals when using these springs. You're supposed to upgrade from a 2 piece to 3 piece valve seal...or vice versa. I can't remember the specifics because the original thread has been deleted for some time now. Anyway, it seemed that if you had a '97 or '98 Ls1 you didn't need to change your valve seals because you already had the right type. Can anyone clarify this for me? Thanks.
Jeff
Jeff
#2
TECH Enthusiast
Re: Need clarification on REV 1116 spring issue
Aren't the spring seats replaced with the rev package? If so, you need new valve seals, you'll destroy the old ones taking them off to change seats, plus, they only cost about $1 a piece.
#3
Banned
iTrader: (3)
Re: Need clarification on REV 1116 spring issue
The intake seal part number is 12533586 and the exhaust seal number is 12457652. They're used on the earily C5 and Fbody cars.
The REV spring kit does come with spring seats which is why you'll need to change to the earlier seals.
Richard
The REV spring kit does come with spring seats which is why you'll need to change to the earlier seals.
Richard
#4
TECH Apprentice
Join Date: Dec 2002
Location: Novi, MI
Posts: 385
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need clarification on REV 1116 spring issue
I'm not sure on the exact years, but going with 98 seals is pretty much a lock, I know 01-02 seals are a 1 piece being the seat at the seal. I think the rest might good, but 98 is a sure thing. These springs are awesome! They're a treat to install.