Damaged head...revisited
#1
TECH Addict
Thread Starter
Join Date: Nov 2001
Location: St Louis, MO
Posts: 2,551
Likes: 0
Received 0 Likes
on
0 Posts
Damaged head...revisited
Last Saturday I picked up the heads I posted about a couple weeks ago. They're Katech ported LS1 castings, but I dont know what stage they are or what they flow. I figured it's hard to go wrong for $200.
Click on a link below for a better picture of the damage. Sorry for the red tint, but this is the best picture I have.
Small | Medium | Large
Depending on how much it will cost to fix, I might have to put these on the shelf for a while. Money is tight right now, so I'm hoping I can save a few dollers over buying newly ported heads.
Where should I send these for repair?
Thanks,
Eric
Click on a link below for a better picture of the damage. Sorry for the red tint, but this is the best picture I have.
Small | Medium | Large
Depending on how much it will cost to fix, I might have to put these on the shelf for a while. Money is tight right now, so I'm hoping I can save a few dollers over buying newly ported heads.
Where should I send these for repair?
Thanks,
Eric
#2
LSxGuy widda 9sec Mustang
iTrader: (12)
Join Date: Nov 2001
Location: Texas and Qatar
Posts: 3,043
Likes: 0
Received 0 Likes
on
0 Posts
Re: Damaged head...revisited
I'd try Katech first, they may be able to reweld and then CNC the chamber. I know Patriot sent heads to Canfield Racing to have welded and CNC'd, but they prob won't do one set for just anyone from what I heard.