malott's formula

wat stall speed should i get for a H/C ls1 ms3 cam and PRC stage 2.5 5.3 heads im thinkin bout goin to a ms4 give me sum feed back ido have 373 gears an i run the stock SS rim and tire sized slicks im thinkn a 3800 its a performabuilt stall

BJSS25

iTrader: (1)

Well is the car going to be mainly for the street or strip. I would recommend a 4000 or 4400. The lowest i would go is 3800. Hope this helps.

malott's formula

ya daily driven ill prob keep ms3

02*C5

iTrader: (1)

I have an ed curtis cam that is very similar in size to the MS3 and I am running a 3400 stall. No issues at all.

Jon@Texas-Speed

iTrader: (18)

I would go 3600+ depending on gear, tire size, power adder, etc. I ran a little smaller cam on my very first combo with a 3800 stall speed converter and a 3.73 gear and it worked great... Especially on the nitrous!

Jon

01ssreda4

iTrader: (96)

4k minimum IMO

BJSS25

iTrader: (1)

I run a 4400 stall with my MS3 cam and 3:73 gears. I could daily drive it with no problems if i had to.

rjkZ28

i run an yank ss4000 3.73 gear on the street no problem

rjkZ28

i run an yank ss4000 3.73 gear on the street no problem ms4 cam

Ws6kid.

how did those gears work on high way?

z28camaross

iTrader: (6)

how is a yank ss4000 with 3.73s on gas mileage?

SOMbitch

iTrader: (8)

My 3600 cost me about 6mpg in town. Highway unchanged of course...

stumprrp

iTrader: (2)

i ran a 230/236 with over 600 lift both sides with a 3600 and 3.73 gears DD and it was a smooth ride, however 3600 wasnt enough for this cam so a ms3 or 4, all motor, i would definataly want a 4400.

3.73s are nice on the highway, 70 MPH with a 26 inch DR was about 2400 RPM. 80 was 2800, 90 was 3300ish

SSmoken

iTrader: (26)

how big of shot and what did the car run?

gsxr1k2

iTrader: (6)

I had my vigilante converter stalled at 3k and was no where near enough. I just restalled to 4k.