Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Rocker Question??

Thread Tools
 
Search this Thread
 
Old 03-16-2010, 06:36 PM
  #1  
On The Tree
Thread Starter
iTrader: (4)
 
SSMaro98's Avatar
 
Join Date: Mar 2007
Location: Horsham,PA
Posts: 100
Likes: 0
Received 0 Likes on 0 Posts
Default Rocker Question??

I have a quick question just checking out my rockers today. Making sure no needle bearings came out. If I grab them by the side and try to move them a little side to side I have a little bit of play in them. Should I tighten them down until there is no play? I know they should be at 22lbs let me know thanks
Old 03-16-2010, 06:41 PM
  #2  
TECH Fanatic
iTrader: (1)
 
02*C5's Avatar
 
Join Date: Apr 2009
Location: Az
Posts: 1,706
Received 297 Likes on 209 Posts

Default

Originally Posted by SSMaro98
I have a quick question just checking out my rockers today. Making sure no needle bearings came out. If I grab them by the side and try to move them a little side to side I have a little bit of play in them. Should I tighten them down until there is no play? I know they should be at 22lbs let me know thanks
You are going to have some play but if you want peace of mind do the following. Get the trunnion upgrade.That's what I did with mine, running a cam with 615 lift and I have no issues.




All times are GMT -5. The time now is 07:40 AM.