Slash8915

iTrader: (21)

I was looking at the Comp XER281HR. I have an LS1 with ported ls6 intake, hooker lt's, ect. I was wondering if this cam would work in an A4 with stock 853's. Also, I will have a 3200 stall and 3.73's. Will the drivability be ok since this is my dd? It will be tuned by a very reknown tuner, so that should help.

Specs:

232/234 .595/.598 112 lsa

stryder

iTrader: (3)

Do you plan on upgrading springs? I think it would work alright. but im not an expert LOL.

02*C5

iTrader: (1)

This again is an example of a mild cam. You are going to be fine hell I might think of milling the heads a ta to about 62CC chambers to push a little more out of the engine. I would of course check your PTV regardless what any one says but u should be more than fine. Drive-ability should not be a problem at all.

good luck

Slash8915

iTrader: (21)

Most definitely. New springs, new pushrods, new timing chain, ported oil pump, ect.