Ls6-228/230
#1
11 Second Club
Thread Starter
iTrader: (14)
Join Date: Jun 2007
Location: Encinal/Kingsville, Texas
Posts: 840
Likes: 0
Received 1 Like
on
1 Post
Ls6-228/230
well i posted this in the benchracing section but no replies
The car went 11.9@113 n/a with stock short block pull of 243s, 02+ ls6 cam, ls6 intake, 4c stall, and bolt ons. it made 354hp/346tq
now i am changing the cam out for a tfs-30602003 (228/230 .585 .585 112) with 918s. also changing out the intake for a fast 90/90 setup and a 100-150 shot.
how much hp do you think it will pick up and what do you think it will run? i was thinking 11.6ish n/a and 10.8? on spray? 380hp and 500on spray?
The car went 11.9@113 n/a with stock short block pull of 243s, 02+ ls6 cam, ls6 intake, 4c stall, and bolt ons. it made 354hp/346tq
now i am changing the cam out for a tfs-30602003 (228/230 .585 .585 112) with 918s. also changing out the intake for a fast 90/90 setup and a 100-150 shot.
how much hp do you think it will pick up and what do you think it will run? i was thinking 11.6ish n/a and 10.8? on spray? 380hp and 500on spray?
#7
A4 vettes are putting down 415-425 through an auto and stock 241 heads with the cam I have on my car. It's a mid 230ish cam, and pulls very well. I have no trap speeds with my car and the cam, but I am guessing 122-123mph in decent air when we cool down. I just spent 2 hours driving my buddies 2004 c5 A4 with the cam. Drove great, and pulls hard.