When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I already have a new set of comp cams 7.425 push rods and swaping my cam. New cam is a 219/228 .562/.567 can I still use these push rods? Stock rockers and Ls6 springs.
These pushrods should be pretty close to what you need but the best way to figure that out is to use a pushrod length checker. Using one of these to make sure you are right will take all the guess word out of it.