Pushrods for Cam, w/stock heads
05-31-2011, 02:55 PM
#1
10 Second Club
Thread Starter
iTrader: (2)
Join Date: Mar 2010
Location: Davenport
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Pushrods for Cam, w/stock heads Any thoughts on the matter.
228r cam
What should the pushrods be. There are two options. 7.4 or 7.425. stock heads for now. I am upgrading the Springs with the cam and maybe the rockers as well, don't know yet. I hear stock work fine for a while. I'd rather put that money to a new stall for the time being anyways. so there has to be something out there that tells you what it should be with the right cam. It's a Machine, not a guessing game... right?... Anyways thoughts and experience need and appreciated.
228r cam
What should the pushrods be. There are two options. 7.4 or 7.425. stock heads for now. I am upgrading the Springs with the cam and maybe the rockers as well, don't know yet. I hear stock work fine for a while. I'd rather put that money to a new stall for the time being anyways. so there has to be something out there that tells you what it should be with the right cam. It's a Machine, not a guessing game... right?... Anyways thoughts and experience need and appreciated.
06-27-2011, 08:08 PM
#4
Restricted User
iTrader: (12)
Join Date: Feb 2010
Location: kansas
Posts: 1,786
Likes: 0
Received 0 Likes
on
0 Posts
I think I will go 7.4's. Just because so many people go with the 7.4's and are completly fine. I was just thinking though if I will measure the base circle on the 228r and however much it is smaller is how much more pushrod I would need
