Part # for the Ls6 Cnc'd heads
#1
Launching!
Thread Starter
Join Date: Sep 2002
Location: monroe,la
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Part # for the Ls6 Cnc'd heads
I was wondering the Gm part # for the cnc'd ls6 heads ported by Lingenfielter? I see two diffrent part #'s on SDPC. 25534321 is one and the other is 88958665. I plan on running the ASA cam and these heads. I think its the 88958665 but im not for sure.
#3
Launching!
Thread Starter
Join Date: Sep 2002
Location: monroe,la
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Yea i saw that.Would i have a problem with p/v clearance with the heads milled .055 with the asa cam?I work a dealership so i can get the setup cheaper than any other setup thats why im looking at it.
#4
On The Tree
iTrader: (2)
Join Date: Feb 2004
Location: Hotlanta
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by G5TA
Yea i saw that.Would i have a problem with p/v clearance with the heads milled .055 with the asa cam?I work a dealership so i can get the setup cheaper than any other setup thats why im looking at it.
Dan