TU1 turbo cam, thoughts
05-06-2012, 04:27 AM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Feb 2009
Location: England, UK
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
TU1 turbo cam, thoughts Just wondering what everyones thoughts on speed incs TU1 cam.
Im planning on fitting a precision 67mm turbo, model number 6776HPS PART NO PTB 650-1550
im not aiming for big power with the turbo but may upgrade to a billet 76mm precision at a later date, or switch to twins.
Want a cam that will pass emissions and run good off boost, but have a slightly lumpy idle for the cammed v8 sound.
im also either going to go 243 heads and low boost, then eventually forged rods and dished pistons, or 317 heads, with forged rods and flat top pistons.
aiming for around 500whp on a stock short block
The car is a 2004 vauxhall monaro (gto)
LS1
M6
Im planning on fitting a precision 67mm turbo, model number 6776HPS PART NO PTB 650-1550
im not aiming for big power with the turbo but may upgrade to a billet 76mm precision at a later date, or switch to twins.
Want a cam that will pass emissions and run good off boost, but have a slightly lumpy idle for the cammed v8 sound.
im also either going to go 243 heads and low boost, then eventually forged rods and dished pistons, or 317 heads, with forged rods and flat top pistons.
aiming for around 500whp on a stock short block
The car is a 2004 vauxhall monaro (gto)
LS1
M6
