93v8clone

Hey guys , well as life would be my budget for my car went down . So the heads and intake setup I wanted to run can't happen . So my question is , I'm building a 370 c/I based off of a lq9 . I'm using forged eagle rods and forged flatop pistons . Now I came across a ls3 top end "heads intake " for next to nothing so I picked them up . What do u guys think this combo will run if I mill the heads to get me to a 11-1 or 11.5-1 comp ratio with the cam I have its a t.s.p 229/236 with a .623/.617 lift on a 112 l.s.a . Trans is a stalled 4l80 . a direct port nitrous kit on it spraying a 150/200 shot .1 7/8 headers etc . This is all goin in a 94 z

batboy

iTrader: (6)

If that's the best you can do due to budget, you'll be fine. It's a pretty good setup. I've seen lots worse combos.