Remote Filter Help (LS1)
03-10-2013, 08:14 PM
#1
Registered User
Thread Starter
Join Date: Feb 2013
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Remote Filter Help (LS1) Im running moroso oil pan #20140 and Milodon #21575 remote filter kit. Im having oil pressure problems after install and want to verify I have the line connected correctly and not backwards. Would connecting the inlet and oulet from the pan to the filter backwards affect the oil pressure??? Please help, responses will be greatly appreciated.
03-10-2013, 09:26 PM
#2
yes
The fwd on the pan goes to the outide of the filter and the rear on the pan goes to the center of the filter.
If you ran the engine with these backwards you may have hurt it. The anti drain back in the filter will only allow the oil to go 1 way.
Tim
The fwd on the pan goes to the outide of the filter and the rear on the pan goes to the center of the filter.
If you ran the engine with these backwards you may have hurt it. The anti drain back in the filter will only allow the oil to go 1 way.
Tim
