Filipcsweden

Hello ! I 'm new here on the forum because I need help, I have emailed lots of different companies ( summit racing) , etc. but get no good answers to my questions.

I live in Sweden and run drifting. I am now building a new car, it is a Toyota Supra MK4 ( mkiv ) with a chevy 5.3L engine . the "truck " engine .

I'll have about 700-800 hp in it and about 6500 - 7000rpm . single turbo and ethanol ( e85 )
I have built custom manifolds , corvette batwing oil pan , aluminum intake , bmw manual 6 speed gearbox ,

I have asked around for what to change to the engine not break with so much effect .

ignition coils ?
crank ?
Rods ?
pistons ?
cam?
valve springs ?
printers ? ( pushers ? )
lifters ?
cam driving ? ( the chain ? )
if someone comes up with something else ?
or if you do not have to change so much?
and where to get hold of this ?

I'm going on holiday to florida now December 26th and be there for about 3 weeks and had thought to buy me some parts home, can anyone help me ?

here is a picture on the engine so far


with best regards / / Filip Carlsson

Filipcsweden

ned help whitch cam i shuld buy?

Bama99z

iTrader: (7)

Give Brian Tooley a call and have his custom grind you a cam for it.

http://www.briantooleyracing.com/

MikeFSKSpeed

iTrader: (37)

Hello, if you have anything specific you are looking for, let me know. We specialize in international shiping as well if you need something even when back in Sweden.

Good luck with the build!

garygnu

contact Martin at Tick performance ,he dose custom cams .check Texas Speed or the WS6 store for prices on the parts you listed .