Review my build plans
#1
Review my build plans
Hi All,
I've got a 2000 Camaro that I'm wanting to do a little work on this spring, I've put a tentative list together and was wanting you guys to give it a look over to see if there's anything I'm missing, or if you would have any other suggestions.
Car is an A4 with about 90k on it.
Overall goals are a low 11@120ish.
FLT Level IV Trans
Yank/CircleD 4k Stall, cooler, gauge
Torque Arm, Panhard Bar, LCA's
3.90's
Nitto 315 DR's
TSP 1 7/8 LT's TSP Duals
PRC 225 as cast heads
Torquer V4 (or something simliar)
Morel 6504, same as 5315
Will be running an LS6 intake for now, don't have money for FAST setup
Racetronix Fuel Pump, 42lb injectors
U/D pulley, Something like a chris1313 ram air
Open to suggestions! Thanks guys.
I've got a 2000 Camaro that I'm wanting to do a little work on this spring, I've put a tentative list together and was wanting you guys to give it a look over to see if there's anything I'm missing, or if you would have any other suggestions.
Car is an A4 with about 90k on it.
Overall goals are a low 11@120ish.
FLT Level IV Trans
Yank/CircleD 4k Stall, cooler, gauge
Torque Arm, Panhard Bar, LCA's
3.90's
Nitto 315 DR's
TSP 1 7/8 LT's TSP Duals
PRC 225 as cast heads
Torquer V4 (or something simliar)
Morel 6504, same as 5315
Will be running an LS6 intake for now, don't have money for FAST setup
Racetronix Fuel Pump, 42lb injectors
U/D pulley, Something like a chris1313 ram air
Open to suggestions! Thanks guys.